The effects of heating on the physicochemical properties of tricalcium silicate root canal sealers

Abstract This study evaluated the effect of heating on the physicochemical properties and surface changes of tricalcium silicate sealers. Three tricalcium silicate root canal sealers (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer), and one epoxy resin-based sealer (AH Plus; control) were tested. The effect of heating on setting time (ST) and flowability were assessed according to ANSI/ADA 57 and ISO 6876 standards. Solubility and dimensional change (DC) of the set sealers were evaluated at 24 hours and after 30 days; the pH of the water used in the DC testing was also measured. Tests were repeated with heated sealers in an oven at 100 °C for 1 min. SEM and EDS analysis were performed. Data were analyzed using One-Way ANOVA and Tukey post-hoc tests (α=5%). Heating decreased the ST for AH Plus and EndoSequence (p<0.05). Heating reduced flowability (p<0.05) and increased pH for AH Plus (p<0.05). The solubility of Bio-C (dried specimens) was not in accordance with the ANSI/ADA standard. The solubility of EndoSequence was significantly higher (p<0.05) when it was heated and dried after 30 days. DC of Bio-C (24 h and 30 days), BioRoot-RCS (30 days) and AH Plus (24 h and 30 days) were not in accordance with the standards. SEM and EDS analysis showed significant changes in sealer microstructure after heating. In conclusion, heating decreased the ST and increased the solubility of EndoSequence BC sealer. No significant changes in flowability, DC, and pH were identified for all three tricalcium silicate sealers after heat application. However, all sealers had significant surface changes.

Resumo Este estudo avaliou o efeito do aquecimento nas propriedades físico-químicas e nas alterações superficiais de cimentos de silicato tricálcico. Três cimentos endodônticos de silicato tricálcico (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer) e um cimento à base de resina epóxi (AH Plus) foram testados para avaliar o efeito do aquecimento no tempo de presa (TP) e escoamento de acordo com as normas ANSI/ADA 57 e ISO 6876. A solubilidade e alteração dimensional (AD) dos cimentos foram avaliadas após 24 horas e 30 dias. O pH da água usada no teste de AD também foi medido. Os testes foram repetidos com cimentos aquecidos em um forno a 100 °C por 1 min. Análises em MEV e EDS foram realizadas. Os dados foram analisados pelos testes de ANOVA-1 via e post hoc de Tukey (α=5%). O aquecimento diminuiu o TP para AH Plus e EndoSequence (p<0,05). O aquecimento reduziu o escoamento (p<0,05) e aumentou o pH do AH Plus (p<0,05). A solubilidade do Bio-C (amostras desidratadas) não estava de acordo com o padrão ANSI/ADA. A solubilidade da EndoSequence foi significativamente maior (p<0,05) quando aquecida e desidratada após 30 dias. As AD de Bio-C (24 h e 30 dias), BioRoot-RCS (30 dias) e AH Plus (24 h e 30 dias) não estavam de acordo com as normas ADA e ISO. A análise em MEV e EDS mostrou alterações significativas na estrutura dos cimentos após aquecimento. Em conclusão, o aquecimento diminuiu o TP e aumentou a solubilidade do cimento EndoSequence BC. Não foram identificadas mudanças significativas no escoamento, AD e pH para os cimentos de silicato tricálcico após aquecimento. Porém, todos os cimentos tiveram alterações significativas na superfície.

Comparison of two obturation techniques on adhesion and proliferation of human periodontal ligament fibroblasts / Comparación de la adhesión y proliferación de fibroblastos periodontales humanos en dos técnicas de obturación endodóntica

The present study aimed to compare the adhesion and proliferation of human periodontal ligament fibroblasts (hPDL) in transverse sections of the teeth sealed with two different obturation techniques, BioRoot RCS/hydraulic obturation (HO) and AH-Plus/continuous-wave condensation (CWC). The techniques were tested using an in vitro model to simulate the interaction between periodontal tissues and the materials. The root canals were instrumented and sterilized. A total of 15 samples were obturated with BioRoot RCS/HO and 15 samples with AH-Plus/CWC. Then, roots were sectioned to obtain obturated teeth slices, and hPDL cells were seeded onto the root slices. The results were obtained at intervals of 4 and 24h for cell adhesion; and at 3,7,14, and 21 days for cell proliferation. Empty cell culture plates were use as controls. The cell adhesion was increased at 4 and 24h for both groups, with an increased response observed in the BioRoot RCS/HO group (p<0.05). The difference in cell proliferation was also found between experimental groups. After 14 days of culture, BioRoot RCS/HO group showed an increase response than control and AH-Plus/CWC groups (p<0.05), and after 21 days both groups behaved better than control group, with an increased response observed in the BioRoot RCS/HO group. This study demonstrated that both root canal sealers allow the attach and growth of periodontal ligament fibroblasts, with an increased biological response in the BioRoot RCS/HO group.

El presente estudio se enfocó en comparar la adhesión y proliferación de fibroblastos de ligamento periodontal humano (hPDL) en secciones transversales de raíces previamente obturadas con dos técnicas de obturación diferentes: obturación hidráulica empleando cono único de gutapercha y BioRoot RCS como sellador (HO), y obturación de condensación de onda continua y AH-Plus como sellador (CWC). Los selladores se usaron en un modelo in vitro que simula la interacción entre los tejidos periodontales y los materiales de obturación. Los conductos radiculares fueron instrumentados, esterilizados y obturados. La muestra se compuso de un total de 15 raíces con la técnica BioRoot RCS/HO y 15 raíces con la técnica AH-Plus/CWC. Las células de hPDL fueron sembradas en condiciones estándar de cultivo sobre las raíces seccionadas. Los resultados fueron obtenidos a intervalos de 4 y 24h para adhesión celular, y a los 3,5,7,14 y 21 días de cultivo para proliferación celular. La adhesión celular a las 4 y 24 horas mostró ser diferente para ambas técnicas en comparación con el grupo control, siendo más importante en el grupo BioRoot RCS/HO. La diferencia en la proliferación entre grupos se observó a los 14 días de cultivo, únicamente para el grupo BioRoot RCS/HO; Sin embargo para el día 21 ambas técnicas mostraron mayor proliferación celular que el grupo control, con mejor respuesta para el grupo BioRoot RCS/HO. Este estudio ha demostrado que ambos selladores de conductos permiten la adhesión y crecimiento de fibroblastos de ligamento periodontal, siendo el grupo BioRoot RCS/HO el que mostró mayor biocompatibilidad.

A comparative study on apical sealing performance between single cone obturation and warm gutta-percha root canal filling / 口腔医学

Objective@#To compare the sealing performance of three kinds of sealers AH-Plus, iRoot SP and GuttaFlow2 combined with single cone obturation and warm gutta-percha root canal filling.@*Methods@#Seventy premolars with single root canal were extracted recently and prepped to P# by Waveone gold system after truncating tooth crown. Then they were randomly divided into 6 experimental groups (10 premolars per group) and 2 control groups (5 premolars per group). Single tip filling and warm gutta-percha filling were performed, namely AH-Plus single tip filling group (A1), AH-Plus warm gutta-percha filling group (A2), iRoot SP single tip filling group (B1), iRoot SP warm gutta-percha filling group (B2), GuttaFlow2 single tip filling group (C1), GuttaFlow2 warm gutta-percha group (C2), positive control group (D group) and negative control group (E group). After dye penetration test was performed on the filled teeth, microleakage of root tip was detected by longitudinal section method. @*Results@#A1 group had the largest microleakage value, while B2 group had the smallest microleakage value. There was no statistically significant difference in apical sealing between single-tip filling and hot dental glue filling with the same sealant (P>0.05), and also no statistically significant difference in apical sealing between the three kinds of sealant with the same filling technology (P>0.05).@*Conclusion@#None of the three root canal sealers can completely seal the root canal, and there is no significant difference in the sealing effect between single tip filling and warm gutta-percha filling.

Does the ultrasonic activation of calcium silicate-based sealers affect their physicochemical properties?

Abstract This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

Resumo Este estudo teve como objetivo avaliar a influência da ativação ultrassônica nas propriedades físico-químicas de cimentos de silicato de cálcio. Nove condições experimentais foram criadas com base nos cimentos de silicato de cálcio (Bio-C Sealer, Sealer Plus BC e Bio Root RCS) e na ativação ultrassônica (sem ativação [SA], 10 segundos e 20 segundos). Os grupos experimentais foram BC-SA, BC-10, BC-20, SPBC-SA, SPBC-10, SPBC-20, BR-SA, BR-10 e BR-20. A ativação foi realizada com um inserto ultrassônico 20/.01. O molde para a análise físico-química foi preenchido e avaliado de acordo com a especificação ANSI/ADA nº. 57: tempo de presa inicial e final, escoamento, radiopacidade e solubilidade. Também foram realizados testes para avaliação de pH e liberação de íons cálcio com períodos experimentais de 1, 24, 72 e 168 horas com pHmetro e espectrofotômetro colorimétrico. Os dados foram analisados por análise de variância one-way e testes post-hoc de Tukey. O nível de significância foi estabelecido em 5%. O tempo de AU aumentou progressivamente o tempo de presa inicial para todos os cimentos de silicato de cálcio (p < 0,05). Vinte segundos de AU aumentaram os valores médios de escoamento de Sealer Plus BC e Bio-C Sealer em comparação com SA (P < 0,05). A AU não influenciou a radiopacidade e a solubilidade dos cimentos testados (P > 0,05). AU por 20 segundos aumentou os níveis de pH e a liberação de íons cálcio de Sealer Plus BC e Bio-C Sealer em 168h (P < 0,05). AU por vinte segundos interfere em algumas propriedades físico-químicas dos cimentos de silicato de cálcio.

Physico-chemical properties of calcium silicate-based sealers in powder/liquid and ready-to-use forms

Abstract Calcium silicate-based root canal sealers have been developed in powder/liquid or premixed ready-to-use forms. The evaluation of the physico-chemical properties of a prototype powder/liquid MTApex Sealer (Ultradent) in comparison to a ready-to-use material EndoSequence BC Sealer (Brasseler) was performed. The paste/paste epoxy resin-based AH Plus (Dentsply) served as control for comparisons. The sealers were evaluated (n = 6) regarding setting time (in dry and moist environments), flow and radiopacity, following the ISO-6876/2012 standard. Also, the pH was assessed. Material's surface and chemical characterization was evaluated using scanning-electron-microscopy (SEM) and energy-dispersive-spectrometry (EDS). Mixed ANOVA, Shapiro-Wilk, Levene, and post-hoc analysis with Bonferroni correction were performed at a significance level of 5%. MTApex Sealer exhibited the highest flow and EndoSequence BC Sealer had a significantly longer setting time in dry compared to the moist environment; however, for MTApex Sealer and AH Plus no significant changes occurred when additional moisture was provided. All materials exceeded 7 mm Al of radiopacity and showed a decreasing alkalinity over the 21 day-analysis. SEM/EDS evaluation resulted in peaks of calcium, silicon, and the respective radiopacifier. The prototype powder/liquid MTApex Sealer had the highest flow and similar setting time in both dry and moist environments; opposingly, EndoSequence BC Sealer was crucially influenced by external moisture. This suggests that the powder/liquid materials' setting seems to be more predictable.

Resumo Os cimentos endodônticos obturadores à base de silicato de cálcio foram desenvolvidos em formas pó/líquido ou pré-misturadas prontas para o uso. Foi realizada a avaliação das propriedades físico-químicas de um protótipo pó/líquido MTApex Sealer (Ultradent) em comparação com um material pronto para uso EndoSequence BC Sealer (Brasseler). O cimento obturador pasta/pasta à base de resina epóxi AH Plus (Dentsply) serviu de controle para as comparações. Os cimentos foram avaliados (n = 6) quanto a: tempo de presa (em ambientes secos e úmidos), escoamento e radiopacidade, seguindo a norma ISO-6876/2012; como também o pH. A superfície do material e a caracterização química foram realizadas utilizando a microscopia eletrônica de varredura (MEV) e espectrometria dispersiva de energia (EDS). ANOVA, Shapiro-Wilk, Levene e análise post-hoc com correção de Bonferroni foram realizadas com nível de significância de 5%. O MTApex Sealer exibiu um escoamento mais alto e o EndoSequence BC Sealer teve um tempo de presa significativamente mais longo em ambiente seco em comparação com o ambiente úmido; entretanto, para MTApex Sealer e AH Plus, nenhuma mudança significativa ocorreu quando umidade adicional foi fornecida. Todos os materiais excederam 7 mm de Al de radiopacidade e mostraram uma alcalinidade decrescente ao longo dos 21 dias de análise. A avaliação MEV/EDS resultou em picos de cálcio, silício e respectivo radiopacificador. O protótipo de pó/líquido MTApex Sealer teve o maior escoamento e tempo de presa semelhante em ambientes secos e úmidos; ao contrário, o EndoSequence BC Sealer foi influenciado de maneira crucial pela umidade externa. Isso sugere que a configuração dos materiais em pó/líquido parece ser mais previsível.

Effect of bioceramic root canal sealers on the bond strength of fiber posts cemented with resin cements

Abstract This study aimed to evaluate the influence of calcium silicate-based sealers on the bond strength of fiber posts using conventional and self-adhesive resin cement. Sixty single-rooted teeth were selected. The canals were prepared with a reciprocating instrument 40.06. The roots were randomly distributed in six groups (n = 10) according to the strategies for root canal filling and fiber posts cementation: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; and Sealer Plus BC/RelyX U200. The roots were transversally sectioned, and one slice per post-third was obtained. The push-out test was performed at a crosshead speed of 1mm/min. The failure patterns were described after assessment with a stereomicroscope with a 10× magnification. Bond strength was calculated and analyzed using the ANOVA and Tukey test. AH Plus did not influence the bond strength of fiber posts cemented with conventional (RelyX ARC) or with self-adhesive resin cement (RelyX U200). The lowest bond strength values were obtained when calcium silicate-based sealers were associated with conventional resin cement (Bio C Sealer/RelyX ARC and Sealer Plus BC/RelyX ARC). Except for Sealer Plus BC/RelyX ARC, all groups presented lower bond strength at the apical portion compared to the cervical portion of the post. Adhesive failures between cement and post and cement and dentin were predominant (55.3%). Calcium silicate-based sealers decreased the bond strength of fiber posts cemented with conventional resin cement.

Resumo Este estudo teve como objetivo avaliar a influência de cimentos à base de silicato de cálcio na resistência de união de pinos de fibra utilizando cimentos resinosos convencionais e autoadesivos. Sessenta dentes humanos monorradiculares foram selecionados. Os canais foram preparados um instrumento reciprocante 40.06. As raízes foram distribuídas aleatoriamente em seis grupos (n = 10) de acordo com as estratégias de obturação do canal e cimentação dos pinos de fibra: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; e Sealer Plus BC/RelyX U200. As raízes foram seccionadas transversalmente e foi obtido um espécime por terço. O teste de push-out foi realizado em uma velocidade de 1mm/min. Os padrões de falha foram descritos após avaliação em estereomicroscópio com aumento de 10×. A resistência de união foi calculada e analisada por ANOVA e teste de Tukey. AH Plus não influenciou na resistência de união dos pinos de fibra cimentados com cimento resinoso convencional (RelyX ARC) ou autoadesivo (RelyX U200) (p > 0,05). Os menores valores de resistência de união foram obtidos quando os cimentos à base de silicato de cálcio foram associados ao cimento resinoso convencional (Bio C Sealer/RelyX ARC e Sealer Plus BC/RelyX ARC) (p < 0,05). Com exceção do Sealer Plus BC/RelyX ARC, todos os grupos apresentaram menor resistência de união na porção apical em comparação com a porção cervical do pino (p < 0,05). Falhas adesivas entre cimento e pino e cimento e dentina foram predominantes (55,3%). Cimentos a base de silicato de cálcio diminuíram a resistência de união de pinos de fibra cimentados com cimento resinoso convencional.

A comparison of the physicochemical properties of AH Plus Jet with samples taken from the beginning, middle and final portions of the automix syringe system

Aim To evaluate physicochemical properties and semi-quantitative elemental analysis of AH Plus Jet with samples from the beginning, middle and final portions of the automix syringe system. Methodology Three experimental groups based on the source of the material used (beginning, middle and final portion) were established for each of the evaluated properties. Setting time, flow and radiopacity were evaluate following ANSI/ADA n. 57 specification. Set specimens was used in the semi-quantitative elemental analysis in an energy-dispersive X ray spectroscopy and scanning-electron microscopy (EDS/SEM). Statistical analysis was performed using one-way ANOVA followed by Tukey test (P<0.05). Results Flow, setting time, solubility and EDS/SEM tests showed no significant differences among the three portions of the automix syringe (P>0.05). Radiopacity test showed significant differences in the beginning of the syringe comparing to the middle and final portions (P<0.05). EDS/SEM analysis identified the presence of C, O, Al, Ca, Zr and W. The element Al, however, was found only in the final portion of the syringe. Conclusions The results of AH Plus Jet suggested an adequate ratio of the components, without segregation between organic and inorganic components, since the results of setting time, flow, solubility and EDS/SEM analysis presented similar values regardless of the portion of the syringe from where the sealer was taken.

Evaluation of the dentinal tubule penetration of an endodontic bioceramic sealer after three final irrigation protocols

Introduction: This study aimed to evaluate the dentinal tubule penetration of an endodontic bioceramic sealer, Sealer Plus BC, after three final irrigation protocols. Methods: Thirty distobuccal roots of maxillary molars were selected. Root canal preparation was performed up to an #40.06 instrument (X1 Blue) under 2.5% sodium hypochlorite irrigation. Specimens were randomly divided into three groups (n=10), according to the final irrigation protocol: G-NaOCl (2.5% sodium hypochlorite + PUI), G-SS (0.9% saline solution + PUI) and G-H20 (Deionized water + PUI). After final irrigation protocols, all specimens were irrigated with phosphate buffer solution. Root canal obturation was performed using the single cone technique and Sealer Plus BC, stained with a specific fluorophore. Specimens were transversely sectioned and each root third was evaluated in a confocal scanning laser microscopy. Images obtained were analyzed for sealer penetration in the dentinal tubules. Results: Dentinal tubule penetration of Sealer Plus BC was not observed in any root third, regardless of the final irrigation protocol investigated. Conclusions: Sealer Plus BC dentinal tubule penetration was not observed after none of the protocols tested. Dentinal tubule penetrability of Sealer Plus BC may be related to other factors rather than the final irrigation protocol.

Effect of dopamine pretreatment on root canal bonding with AH-plus sealer / 口腔疾病防治

Objective@# To observe the effect of dopamine pretreatment of the root canal on improving the bonding performance of AH-plus sealer.@*Methods @# A total of 32 freshly isolated permanent teeth with a single canal were collected, with no caries, no fracture of roots, and a root canal curvature<10°. All sample root canals were prepared to F2 with ProTaper rotating nickel-titanium instruments and then treated with 1 mg/mL, 2 mg/mL, or 3 mg/mL dopamine solution for 24 hours and divided into 4 groups (n = 8): 0 mg/mL dopamine group (blank control group), 1 mg/mL dopamine group, 2 mg/mL dopamine group, and 3 mg/mL dopamine group. Scanning electron microscopy was used to observe the combination of dopamine and root canal dentin wall; laser confocal scanning microscopy was used to observe the penetration of AH-plus sealer; and root canal filling was performed with AH-plus sealer and gutta-percha tip using the cold gutta-percha lateral pressure technique. The root canal samples were cut horizontally at the middle and the apical third sections of the root with a slice thickness of 1-2 mm. The push-out test was carried out under an Instron universal testing machine to compare the push-out bonding strength between each group. @*Results @#Scanning electron microscopy showed that most of the dentinal tubules were open in the control group after 0 mg/mL dopamine solution treatment for 24 hours. In the 1 mg/mL group, a small number of dopamine particles on the surface of the dentin tubules in the inner wall of the root canal were loose and unevenly distributed. In the 2 mg/mL group, most of the dentinal tubules were covered by dopamine particles, and the dopamine layer was uniform and dense. In the 3 mg/mL group, a large number of dopamine particles were deposited at the mouth of the dentinal tubules, but the distribution was uneven. Dopamine and AH-plus sealer can be seen to simultaneously infiltrate into dentinal tubules under a confocal laser scanning microscope. The interaction of the two factors, the anatomical location and dopamine concentration, had no significant effects on the bonding strength of AH-plus sealer (P>0.05). Root canals treated with 2 mg/mL dopamine had the highest bonding strength in all groups (P<0.05). Analysis of the push-out test of bonding strength with AH-plus sealer at different anatomical locations showed significant differences (P<0.05). The push-out bonding strength of the AH-plus sealer in the middle third section of the root was higher than that in the apical third section of the root.@*Conclusion@# Different dopamine concentrations could affect the bonding strength of AH-plus sealer in root canals. When treated with 2 mg/mL dopamine for 24 hours, the bonding effect of AH-plus sealer in root canals was improved.

Energy-Dispersive X-Ray Spectrometry Analysis and Radiopacity of Five Different Root Canal Sealers

Abstract Root canal sealers should have optimum adhesion to the root dentin, low cytotoxicity, sufficient radiopacity and high dimensional stability, which depend mainly on their chemical composition. The aims of this study were to evaluate the chemical composition of Syntex (Cerkamed, Stalowa Wola, Poland), Adseal (Meta Biomed, Cheongju-si, Korea), Sealapex (SybronEndo, Scafati, Italy), MTA Fillapex (Angelus, Londrina, Brazil) and GuttaFlow Bioseal (Coltene/Whaledent, Altstätten, Switzerland) and to determine their radiopacity comparatively. Stainless steel molds with an inner diameter of 5 mm and a depth of 2 mm were constructed. Tested root-canal sealers were mixed and poured into the molds. Following setting, digital periapical radiographs of the specimens (n=12) were taken under standard exposure conditions and the mean gray-values of specimens were measured using a computer graphics program. Then the specimens were examined by scanning electron microscopy, and Energy-dispersive X-ray analysis was performed. The data were analyzed using One-way ANOVA followed by Holm-Sidak multi-comparison test (p = 0.05). Sealapex showed higher calcium peak than MTA Fillapex, GuttaFlow Bioseal, Adseal and Syntex sealers. MTA Fillapex contained a highest amount of tungstate. Sealapex presented the highest radiopacity value among the tested materials (p < 0.05), whereas MTA Fillapex was the least radiopaque material (p < 0.05). Each root canal sealer contains different compositions of radiopacifiers including bismuth oxide, calcium tungstate and zirconium oxide. The tested root canal sealers had radiopacity values above the ISO-specified limit. Sealapex was the most radiopaque root canal sealer followed by GuttaFlow Bioseal, Syntex, Adseal and MTA Fillapex.

Resumo Os cimentos endodônticos devem conter ótima adesão à dentina radicular, baixa citotoxicidade, radiopacidade suficiente e estabilidade dimensional elevada, que dependem principalmente da sua composição química. Os objetivos deste estudo foram avaliar a composição química de Syntex (Cerkamed, Stalowa Wola, Polônia), Adseal (Meta Biomed, Cheongju-si, Coreia), Sealapex (SybronEndo, Scafati, Itália), MTA Fillapex (Angelus, Londrina, Brasil) e GuttaFlow Bioseal (Coltene/Whaledent, Altstätten, Suíça) e determinar comparativamente a sua radiopacidade. Foram construídos moldes de aço inoxidável com um diâmetro interior de 5 mm e uma profundidade de 2 mm. Os cimentos testados foram misturados e vertidos em moldes. Após a fixação, foram feitas radiografias periapicais digitais dos espécimes (n=12) em condições de exposição padrão e os valores médios de cinza dos espécimes foram medidos utilizando um programa de computação gráfica. Em seguida, as amostras foram examinadas por microscopia eletrônica de varredura, e foi realizada uma análise de raios X dispersiva de energia. Os dados foram analisados utilizando a ANOVA unidirecional seguida do teste de comparação múltipla Holm-Sidak (p = 0,05). O Sealapex mostrou um pico de cálcio mais elevado do que os cimentos MTA Fillapex, GuttaFlow Bioseal, Adseal e Syntex. O MTA Fillapex continha uma quantidade mais elevada de tungstato. O Sealapex apresentou o maior valor de radiopacidade entre os materiais testados (p < 0,05), enquanto que a MTA Fillapex foi o material menos radiopaco (p < 0,05). Cada cimento endodôntico contém diferentes composições de radiopacificadores incluindo óxido de bismuto, tungstato de cálcio e óxido de zircônio. Os cimentos testados apresentaram valores de radiopacidade acima do limite especificado pela ISO. Sealapex foi o cimento obturador mais radiopaco seguido por GuttaFlow Bioseal, Syntex, Adseal e MTA Fillapex.

Antimicrobial Activity of Bioceramic Root Canal Sealers: A Systematic Review

ABSTRACT: Actually, bioceramic endodontic sealers represent an advantageous option for root canals sealing due to their multiple properties. There are several in vitro studies about their antimicrobial properties, however, their comparative antimicrobial potential, compared with other types of endodontic sealers is not entirely clear. The aim of the present research was to perform a systematic review to assess the antimicrobial effectiveness of commercially available bioceramic root canal sealers against Enterococcus faecalis in accordance with the PRISMA statement. A literature search was made in four electronic databases: MEDLINE, ClinicalKey, ScienceDirect and EBSCO. Were included in vitro studies, published in English, between 2015 and 2019. The evaluation of the selected studies was performed by two authors, independently. Four studies were included in the review. EndoSequence™ (Brasseler USA, Savannah, GA) also available on the market as TotalFill™ (Brasseler USA, Savannah, GA) and BioRoot™ were the bioceramic root canal sealers evaluated. The risk of bias was assessed according to the modified CONSORT checklist for preclinical studies. Selected studies reported positive antimicrobial activity against Enterococ cus faecalis in the bioceramic sealers evaluated. The less activity was observed on BioRoot™ sealer. All studies used a planktonic form of Enterococcus faecalis and in vitro laboratory methods of evaluation. The antimicrobial activity reported varies accordi ng to the laboratory method used, even for the same sealer, so the existence of false negatives is suggested. This systematic review identified the need for more research into the antimicrobial activity of bioceramic sealers, ideally with models using bacterial biofilms and studies in humans.

RESUMEN: En la actualidad, los cementos selladores biocerámicos son una opción ventajosa para la obturación de canales radiculares debido a sus múltiples propiedades. Existen varios estudios in vitro acerca de sus propiedades antimicrobianas, sin embargo, su potencial antimicrobiano, en comparación con otros tipos de cementos selladores endodónticos, no se está completamente claro. El propósito de la presente investigación fue realizar una revisión sistemática sobre las propiedades antimicrobianas de los cementos selladores biocerámicos disponibles en el mercado sobre Enterococcus faecalis, de acuerdo a la declaración PRIS- MA. Se realizó una búsqueda bibliográfica en cuatro bases de datos electrónicas: MEDLINE, ClinicalKey, ScienceDirect y EBSCO. Se incluyeron estudios in vitro, publicados en inglés, entre 2015 y 2019. La evaluación de los estudios seleccionados fue realizada por dos autores de forma independiente. Fueron incluidos cuatro estudios en la revisión. EndoSequence™ (Brasseler USA, Savannah, GA), también comercializado en el mercado como TotalFill™ (Brasseler USA, Savannah, GA), y BioRoot™ fueron los cementos selladores biocerámicos evaluados. El riesgo de sesgo se evaluó de acuerdo con la lista de verificación CONSORT modificada para estudios preclínicos. Los estudios seleccionados informaron actividadantimicrobiana positiva contra E. faecalis en los selladores biocerámicos evaluados. La menor actividad la presentó BioRootTM. Todos los estudios utilizaron una forma planctónica de E. faecalis y métodos de evaluación in vitro. La actividad antimicrobiana reportada varió en base al método de laboratorio utilizado, incluso para el mismo sellador, por lo que se sugiere la existencia de falsos negativos. Esta revisión sistemática identificó la necesidad de realizar más investigaciones sobre la actividad antimicrobiana de los selladores biocerámicos, idealmente con modelos que utilicen biopelículas bacterianas y estudios en humanos.

Micro-push-out bond strength of mineral­based root canal sealer in canals with different tapers / Fuerza de unión por micro-expulsión del sellador de conductos radiculares a base de minerales en conductos con diferentes ahusamientos

Objective: The aim of this study was to assess the micro-push-out bond strength of a mineral-based root canal sealer, BioRoot RCS in canals prepared by K3XF rotary systems of two different tapers. Material and Methods: Eighty caries free maxillary central incisors were used in this study. The samples were allocated into 4 groups (n=20) according to the root canal sealer and taper of the rotary instruments. The samples were obturated using single cone obturation technique. From each root 1mm thick slices at coronal, middle and apical thirds were collected using hard tissue microtome under continuous water coolant. Push-out tests were done for these sections using a Universal testing machine (INSTRON 8801) at a crosshead speed of 1mm/min. One-way analysis of variance (ANOVA) was used to compare the bond strengths within groups and Tukey's multiple post hoc analysis was used for pair-wise comparison of bond strengths. Results: AH Plus exhibited higher micro-push-out bond strength than BioRootRCS though they did not differ significantly (p>0.05). Preparation of root canals with 6% taper rotary instruments showed higher bond strength than 4% though they did not differ significantly (p>0.05). Conclusion: There was no significant difference between micro-push-out bond strength values of BioRoot RCS and AH Plus. The bond strength values were high in 6% taper canals than 4% canals though the difference was not significant statistically.

Objetivo: El objetivo de este estudio fue evaluar la fuerza de unión por micro-expulsión de un sellador de conductos radiculares de base mineral, BioRoot RCS, en conductos preparados por sistemas rotativos K3XF con dos conos diferentes. Material y Métodos: En este estudio se utilizaron 80 incisivos centrales superiores libres de caries. Las muestras se distribuyeron en cuatro grupos (n = 20) de acuerdo al sellador del conducto radicular y al cono de los instrumentos rotativos. Las muestras se obturaron mediante la técnica de obturación de un solo cono. De cada raíz se recogieron rodajas de 1 mm de grosor en los tercios coronal, medio y apical utilizando un micrótomo de tejido duro con refrigeración continua por agua. Posteriormente, se realizó una prueba de expulsión para estas secciones utilizando una máquina de prueba universal (INSTRON 8801) a una velocidad del cabezal transversal de 1mm/min. Se utilizó el análisis de varianza unidireccional (ANOVA) para comparar las resistencias de la unión dentro de los grupos y el análisis post hoc multiple de Tukey se utilizó para la comparación por pares de las resistencias de la unión. Resultados: AH Plus exhibió una fuerza de unión de micro-expulsión más alta que BioRootRCS, aunque no difirieron significativamente (p>0,05). La preparación de los conductos radiculares con instrumentos rotativos ahusados al 6% mostró una fuerza de unión superior al 4%, aunque no difirieron significativamente (p>0,05). Conclusión: No hubo diferencias significativas entre los valores de fuerza de unión de micro-expulsión de BioRoot RCS y AH Plus. Los valores de la fuerza de unión fueron más altos en canales cónicos al 6% que en canales al 4%, aunque la diferencia no fue significativa estadísticamente.

Biological properties of experimental methacrylate-based sealers containing calcium phosphates

Abstract This study aimed to evaluate, in vitro and in vivo, the biocompatibility of experimental methacrylate-based endodontic sealers containing α-tricalcium phosphate (α-TCP) or nanostructured hydroxyapatite (HAp). Experimental methacrylate-based dual-cure sealers with the addition of α-TCP or HAp, at 10%wt were formulated and compared to AH Plus (AHP). Cell viability was assessed by 3-(4,5-dimethyl-thiazoyl)-2,5-diphenyl-tetrazolium bromide (MTT), and sulforhodamine B (SRB). Sealers were implanted in rats' subcutaneous tissue and histologically evaluated. Bioactivity was assessed by alkaline phosphatase enzyme activity (ALP) and Alizarin Red (AR), using apical papillary cells (SCAPs), and by the bone deposition measured in surgical cavities on rats' femur filled with AH Plus or α-TCP. In both viability assays, HAp and AHP sealers were similar, and α-TCP presented lower viability compared to the others at MTT assay (p<0.05). A gradual decrease of the inflammatory response according to the periods was observed and AHP was the only that presented giant cells (7-day period). Collagen fibers condensation increased according to the periods, with no differences among sealers. There was an increase at ALP activity and mineralized nodules deposition according to periods. HAp and α-TCP presented higher values for ALP activity at 5 days and at 5, 10, and 15 days for AR and were different from AHP (p<0.05). α-TCP presented superior values at 10 and 15 days compared to HAp and AHP for AR (p<0.05). At 90 days, α-TCP and control (empty cavity) showed high bone deposition compared to AHP (p<0.05). α-TCP and HAp, in a methacrylate-based sealer, presented biocompatibility and bioactivity, with the potential to be used as endodontic sealers in clinical practice. Further investigations are required to gain information on the physicochemical properties of these sealers formulation before its clinical implementation.

Resumo O objetivo deste estudo foi avaliar a biocompatibilidade de cimentos endodônticos experimentais à base de metacrilato contendo fosfato α-tricálcico ou hidroxiapatita nanoestruturada in vitro e in vivo. Cimentos experimentais de cura dual à base de metacrilato com a adição de fosfato de α-tricálcico (α-TCP) ou hidroxiapatita (HAp), a 10% em peso, foram formulados e comparados com AH Plus (AHP). Viabilidade celular foi avaliada por brometo de 3- (4,5-dimetil-tiazoil) -2,5-difenil-tetrazólio (MTT) e sulforodamina B (SRB). Cimentos foram implantados no tecido subcutâneo dos ratos e avaliados histologicamente. Bioatividade foi avaliada pela atividade da enzima fosfatase alcalina (ALP) e Alizarin Red (AR) utilizando células da papila apical (SCAPs) e pela deposição óssea, medida em cavidades cirúrgicas no fêmur de ratos preenchidos com AH Plus e α-TCP. Nos dois ensaios de viabilidade, HAp e AHP não apresentaram diferenças estatísticas, α-TCP apresentou menores resultados de viabilidade para o ensaio MTT (p <0,05). Resultados histológicos mostraram que houve uma diminuição do conteúdo inflamatório de acordo com os períodos, e o AHP foi o único grupo que apresentou células gigantes (período de 7 dias). A condensação das fibras colágenas aumentou conforme os períodos, sem diferenças entre os grupos. Houve aumento da atividade da ALP e deposição de nódulos mineralizados de acordo com os períodos. HAp e α-TCP apresentaram maiores valores para a atividade de ALP em 5 dias e em 5, 10 e 15 dias para AR, com diferença para o AHP (p <0,05). O α-TCP apresentou valores superiores aos 10 e 15 dias quando comparado ao HAp e AHP para AR (p <0,05). Aos 90 dias, α-TCP e controle (cavidade vazia) apresentaram maior deposição de tecido ósseo quando comparado ao AHP (p <0,05). α-TCP e HAp, presentes nos cimentos à base de metacrilato, apresentaram biocompatibilidade e potencial para serem utilizados como seladores endodônticos na prática clínica. Investigações adicionais são necessárias para obter informações sobre as propriedades físico-químicas dessas formulações de cimentos antes de sua implementação clínica.

Influence of Powder-to-Gel Ratio on Physicochemical Properties of a Calcium Silicate Sealer / Influencia de la relación polvo-gel sobre las propiedades fisicoquímicas de un sellador de silicato de calcio

Abstract Differences in liquid-to-powder ratio can affect the properties of calcium silicate-based materials. This study assessed the influence of powder-to-gel ratio on physicochemical properties of NeoMTA Plus. Setting time (minutes), flow (mm and mm²), pH (at different periods), radiopacity (mm Al) and solubility (% mass loss) were evaluated using the consistencies for root repair material (NMTAP-RP; 3 scoops of powder to 2 drops of gel) and root canal sealer (NMTAP-SE; 3 scoops of powder to 3 drops of gel), in comparison to Biodentine cement (BIO) and TotalFill BC sealer (TFBC). Statistical analysis was performed using one-way ANOVA and Tukey tests (α=0.05). BIO had the shortest setting time, followed by NMTAP-RP and NMTAP-SE. TFBC showed the highest setting time and radiopacity. BIO, NMTAP-RP, and NMTAP-SE had similar radiopacity. All materials promoted an alkaline pH. NMTAP-RP/SE presented lower solubility than BIO and TFBC. Regarding the flow, TFBC had the highest values, followed by NMTAP-SE, and NMTAP-RP. BIO had the lowest flow. In conclusion, NMTAP in both powder-to-gel ratios showed high pH and low solubility. The increase in the powder ratio decreased the setting time and flow. These findings are important regarding the proper consistency and work time to clinical application.

Resumen Las diferencias en la proporción líquido/polvo pueden afectar las propiedades de los materiales a base de silicato de calcio. Este estudio evaluó la influencia de la proporción polvo/gel en las propiedades fisicoquímicas del cemento NeoMTA Plus. El tiempo de fraguado (minutos), la fluidez (mm y mm²), el pH (en diferentes períodos), la radiopacidad (mmAl) y la solubilidad (% de pérdida de masa) fueron evaluados utilizando las consistencias para el material de reparación radicular (NMTAP-RP; 3 cucharadas de polvo/2 gotas de gel) y para cemento sellador del conducto radicular (NMTAP-SE; 3 cucharadas de polvo/3 gotas de gel), en comparación con el cemento Biodentine (BIO) y el cemento TotalFill BC (TFBC). El análisis estadístico se realizó utilizando las pruebas ANOVA y Tukey unidireccionales (α=0.05). BIO tuvo el tiempo de fraguado más corto, seguido de NMTAP-RP y NMTAP-SE. TFBC mostró el mayor tiempo de fraguado y radiopacidad. BIO, NMTAP-RP y NMTAP-SE tuvieron una radiopacidad similar. Todos los materiales promovieron un pH alcalino. NMTAP-RP/ SE tuvieron una solubilidad menor que BIO y TFBC. Con respecto a la fluidez, TFBC tuvo los valores más altos, seguido de NMTAP-SE y NMTAP-RP. BIO tuvo la fluidez más baja. En conclusión, NMTAP en la relación polvo/gel mostró un pH alto y una baja solubilidad. El aumento en la proporción de polvo disminuyó el tiempo de fraguado y la fluidez. Estos hallazgos son importantes con respecto a su consistencia y tiempo de trabajo durante la aplicación clínica.

Comportamiento biológico de dos selladores endodónticos biocerámicos en el tejido óseo de la rata. Un ensayo in vivo / Biological behavior of two bioceramic endodontic sealers in the bone tissue of the rat. In vivo study

Objetivo: Analizar cualitativamente la biocompatibilidad y la capacidad osteogénica de dos selladores endodónticos a base de silicato de calcio: el biocerámico Bio-C Sealer (BIOc) y MTA Densell Sealer (MTAd). Materiales y métodos: En la tibia izquierda de 30 ratas Wistar macho se implantó un tubo de silicona obturado con BIOc. De igual forma, en la tibia derecha de cada una se implantó un tubo de silicona obturado con MTAd. Los animales fueron eutanasiados en grupos de 10 a los 7, 30 y 90 días. Las tibias fueron procesadas para su análisis histológico y analizadas con microscopía óptica. Según lo observado, fueron clasificadas en tres categorías: 1: Presencia de cápsula fibrosa sana y neoformación ósea, sin células inflamatorias; 2: Cápsula fibrosa con o sin células inflamatorias, formación inicial de trabéculas óseas y presencia de células inflamatorias en los tejidos circundantes; 3: Ausencia de cápsula y/o tejido óseo y presencia de numerosas células inflamatorias. Los resultados fueron analizados con las pruebas de McNemar y de Kruskal-Wallis (P<0,05). Resultados: A los 7 días, los tejidos en contacto con BIOc y MTAd reaccionaron según la categoría 3. A los 30 días, todos los casos correspondieron a la categoría 2. A los 90 días, los 10 implantes de BIOc fueron clasificados según la categoría 1. MTAd presentó nueve casos de categoría 1 y un caso de categoría 2. No hubo diferencias significativas entre ambos selladores dentro de cada uno de los períodos de observación (P>0,05), pero sí las hubo cuando se compararon los resultados obtenidos entre períodos de observación (P<0,05). Conclusión: Al finalizar el ensayo, Bio-C Sealer y MTA Densell Sealer se comportaron como materiales biocompatibles y osteogénicos en tibias de rata (AU)

Aim: To analyze the biocompatibility and osteogenic capacity of two silicate-based endodontic sealers, the bioceramic Bio C-Sealer (BIOc) and the MTA-based sealer MTA Densell (MTAd). Materials and methods: Silicone tubes filled with BIOc were implanted in the left tibias of 30 white male Wistar rats (one per tibia). In similar fashion, tubes filled with MTAd were implanted in the right tibias. The animals were euthanized in groups of 10 at 7, 30 and 90 days postoperatively. The tibias were removed, processed for histology and analysed under optical microscopy. The observations were classified in three categories: 1: Presence of a healthy fibrous capsule and newly formed bone trabeculae without inflammatory cells. 2: Fibrous capsule with or without inflammatory cells, initial formation of bone trabeculae and presence of inflammatory cells in the surrounding tissues. 3: Absence of a fibrous capsule and/or bone formation with the presence of numerous inflammatory cells. Data was analyzed by the McNemar and the Kruskal-Wallis test (P<0.05). Results: At 7 days: The tissues in contact with BIOc and MTAd reacted as category 3. At 30 days: All cases were classified as category 2. At 90 days: All BIOc cases were in category 1 while MTAd presented nine cases of category 1 and one case of category 2. There were no significant differences (P>0.05) between both sealants BIOc and MTAd in each period group. However, there were significant differences (P<0.05) when the results between periods were compared. Conclusion: At the end of the experiment both, BIOc and MTAd behaved as biocompatible and osteogenic materials in the rats' tibias (AU)

Antibacterial Activity of a New Ready-To-Use Calcium Silicate-Based Sealer

Abstract The aim of this study was to evaluate the antibacterial potential of a calcium silicate-based sealer (Bio-C Sealer, Angelus) against common bacteria in primary and secondary endodontic infections. Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Streptococcus mutans were exposed to fresh Bio-C Sealer for 24 h by the agar diffusion method (n=5). Additionally, the antibacterial activity was investigated against E. faecalis and S. mutans biofilms (48 h old) grown in discs with 4 mm in diameter and 2 mm in height. (n=3) of set discs of Bio-C Sealer (Angelus), EndoFill (Dentsply-Mallefer), Sealer 26 (Dentsply), AH Plus (Dentsply), Sealapex (Sybron-Endo) and EndoSequence BC Sealer (Brasseler). The antibacterial activity was evaluated by colony forming unity (CFU) counting using ImageJ software. Data were compared by one-way ANOVA followed by Holm-Sidak test (a=5%). Fresh Bio-C Sealer exhibited antimicrobial activity against all bacteria evaluated by agar diffusion method, except for S. mutans. Set discs of all endodontic sealers tested showed similar CFU values for E. faecalis (p>0.05). S. mutans in biofilms showed higher susceptibility to EndoFill compared with the other sealers (p<0.05). In conclusion, the results indicate that fresh Bio-C Sealer does not inhibit S. mutans growth, but exhibits antibacterial activity against E. faecalis, S. aureus, P. aeruginosa and E. coli. After setting, the Bio-C Sealer exhibits an antimicrobial potential comparable to that of the other sealers evaluated in E. faecalis biofilm, but lower than that of EndoFill for S. mutans biofilm.

Resumo O objetivo deste estudo foi avaliar o potencial antibacteriano do novo cimento biocerâmico (Bio-C Sealer, Angelus) contra bactérias comuns em infecções endodônticas primárias e secundárias. Culturas de Enterococcus faecalis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus e Streptococcus mutans foram expostos a amostras frescas do Bio-C sealer durante 24 h pelo método de difusão em agar (n=5). A atividade antibacteriana de amostras dos cimentos Bio-C Sealer (Angelus), EndoFill (Dentsply-Mallefer), Sealer 26 (Dentsply), AH Plus (Dentsply), Sealapex (Sybron-Endo) e EndoSequence BC Sealer (Brasseler) após a presa também foi investigada em biofilmes de 48 h das bactérias E. faecalis e S. mutans, crescidos em discos com 4 mm de diâmetro e 2 mm de altura. A atividade antibacteriana foi avaliada por contagem das unidades formadoras de colônias (UFC) utilizando o software ImageJ. Os dados foram comparados por ANOVA a um critério seguido pelo pós-teste Holm-Sidak (a=5%). Amostras frescas do Bio-C Sealer exibiram atividade antimicrobiana contra todas as bactérias avaliadas pelo método de difusão em ágar, exceto para S. mutans. A análise da formação de biofilme mostrou que todos os cimentos endodônticos testados apresentaram valores similares de UFC para E. faecalis (p> 0,05), enquanto biofilmes de S. mutans foram mais suscetíveis ao EndoFill em comparação com os demais cimentos (p<0,05). Conclui-se que o cimento Bio-C Sealer fresco exibe atividade antibacteriana para E. faecalis, S. aureus, P. aeruginosa e E. coli, mas não inibe o crescimento de S. mutans. Após a presa, o cimento Bio-C Sealer exibe potencial antimicrobiano similar ao dos demais cimentos avaliados em biofilme de E. faecalis, mas inferior ao do EndoFill para S. mutans.

Antibacterial Efficacy of Nanoparticle-Incorporated Root Canal Sealer against Common Endodontic Pathogens - An in vitro Study

Infection caused by microorganisms play a crucial role in the induction of inflammation of pulpal as well as the periapical tissues. Factors like improper disinfection or obturation of the root canal space contributes to the failure of the root canal treatment. The aim of the study was to modify the contents of MTA-based sealer with nanoparticles and check for its antibacterial efficacy against E. faecalis. Silver nanoparticles (10 nm) were incorporated in MTA based sealer at various concentrations to form the test product. The antibacterial efficacy of the modified sealer was tested by well diffusion test on E. faecalis. The zone of inhibition (mm) was checked for each test product. Analysis of the results showed significant diameters of zones of inhibition (mm) as compared to sealer without nanoparticles. The zone of inhibition increased with the increase in the concentration of silver nanoparticles. The silver nanoparticle incorporated sealer can be used in the clinical setup to prevent reinfection of the root canal system and ensure the success of the root canal treatment.

Dentinal tubule penetration of a calcium silicate-based root canal sealer using a specific calcium fluorophore

Abstract This study aimed to evaluate penetrability on dentinal tubule of a new bioceramic sealer through confocal laser scanning microscopy (CLSM). A specific fluorophore (Fluo-3) was mixed with the sealer. Forty distobuccal roots from maxillary molars were selected, and root canal preparation was carried out with Wave One Gold # 35.06 instruments. Roots were randomly assigned to 4 groups according to the filling procedures: Bioceramic/Lentulo (Sealer Plus BC); Bioceramic/EasyClean group, three activation of the sealer (3x20 s) with Easy Clean instrument; Bioceramic/Irrisonic: ultrasonic activation for 30 s; and AHplus/Lentulo: epoxy resin based sealer (AH Plus) was utilized with the same protocol as the BC/LE group. After 72 h, specimens were transversally sectioned at 2 and 7 mm from root apex and then analyzed through CLSM. Sealer penetration area on dentinal tubule was measured by Adobe Photoshop CC2018. Kruskal Wallis and Wilcoxon T tests were carried out. Penetrability results were similar for both sealers regardless of which technique was performed to activate them inside the root canal (p>0.05). It is reasonable to conclude that penetration of bioceramic and epoxy resin based sealers occurred unimpressively. The type of instrument used to activate bioceramic sealer did not affect penetrability. Fluo 3 should be recommended as the fluorophore to evaluate dentinal tubule penetration of bioceramic sealers.

Resumo Este estudo objetivou avaliar a penetração nos túbulos dentinários de um novo cimento biocerâmico utilizando microscopia confocal de varredura a laser (MCVL). Um fluoróforo específico (Fluo-3) foi misturado com o cimento. Quarenta raízes distovestibulares de molares superiores foram selecionados e o preparo do canal radicular foi realizado com instrumentos Wave One Gold #35.06. As raízes foram divididas randomicamente em quatro grupos de acordo com os procedimentos obturadores: Bioceramic/Lentulo: cimento biocerâmico (Sealer Plus BC); Bioceramic/EasyClean: três ativações do cimento com instrumento Easy Clean (3 x 20 s); Bioceramic/Irrisonic: ativação ultrassônica do cimento por 30 s e AHplus/Lentulo: cimento à base de resina epóxica (AH Plus) foi utilizado com o mesmo protocolo que o grupo Bioceramic/Lentulo. Após 72h, os espécimes foram seccionados transversalmente em 2 e 7 mm do ápice radicular e analisados com MCVL. A área de penetração nos túbulos dentinários foi mensurada com Adobe Photoshop CC2018. O teste de Kruskal Wallis e T de Wilcoxon foram realizados. Os resultados de penetração foram similares para ambos os cimentos independentemente de qual técnica foi utilizada para ativá-los no interior do canal radicular (p>0,05). É razoável concluir que a penetração de cimentos biocerâmicos e à base de resina epóxica ocorreram de forma pouco expressiva. O tipo de ativação do cimento biocerâmcio não afeta sua penetrabilidade nos túbulos dentinários. Fluo 3 deve ser recomendado como o fluoróforo para avaliar a penetração intratubular de cimentos biocerâmicos.

Capacidade de Adesão de Cimentos Biocerâmicos e Resinosos com a Dentina Radicular: Uma Revisão Integrativa / Adhesion capacity of bioceramic and resin-based root canal sealer to root dentin: an integrative review

Objetivo: comparar a capacidade de adesão do cimento biocerâmico EndoSequence BC e do cimento resinoso AH Plus através de uma revisão integrativa. Material e Métodos: os bancos de dados online Medline/PubMed, Scopus, Web of Science e BVS foram utilizados para a revisão da literatura. Os critérios de elegibilidade incluíram artigos disponíveis na íntegra nas bases de dados pesquisadas, em inglês, e o conteúdo referente à adesão do cimento Endosequence BC sealer em comparação ao AH Plus. Resultados: foram encontrados 45 artigos. Após a remoção duplicada, 22 artigos foram selecionados. Após a leitura dos resumos, textos completos e aplicação dos critérios de inclusão, foram incluídos no total oito artigos. Em relação à capacidade de adesão dos cimentos testados, o AH Plus apresentou melhor adesão do que o cimento BC sealer em três artigos e menor adesão em dois artigos. Força de adesão semelhante foi observada entre os grupos em três estudos. Conclusões: com base nos estudos incluídos, o AH Plus apresenta maior resistência de união quando comparado ao BC Sealer

Aim: To compare the adhesion capacity of the bioceramic EndoSequence BC sealer and the AH Plus sealer through an integrative review. Methodology: The Medline/PubMed, Scopus, Web of Science and VHL online databases were used for the literature review. Eligibility criteria comprised articles available in full on the researched databases, in English, and content addressing Endosequence BC sealer adhesion compared to AH Plus sealer. Results: A total of 45 articles were found. After duplicate removal, 22 articles were selected. After reading the abstracts, full texts and applying the inclusion criteria, eight articles in total were included in the present study. Concerning the adhesion capacity of the tested cements, the AH Plus was reported as presenting better adhesion than the BC sealer in three articles, and less adhesion in two articles. Similar adherence strength was observed between groups in three studies. Conclusions: Based on the included studies, the AH Plus displays greater bond strength when compared to the BC Sealer.

Estudio con Microtomografía de Conductos Tratados con Sistemas Reciprocantes y Obturados con Cementos Biocerámicos / Microtomography Study of Root Canals Treated with Reciprocating Systems and Filled with Bioceramic Cements

Objetivo: Comparar la presencia de poros en los tres tercios del conducto radicular luego de la obturación con cementos biocerámicos. Se trataron endodónticamente 20 premolares inferiores unirradiculares, de anatomía oval. Los mismos fueron divididos en dos grupos y se obturaron con dos cementos biocerámicos diferentes. Todas las muestras fueron analizadas con microtomografía de rayos X para comparar la presencia de poros en los tres tercios radiculares, clasificando los mismos en internos, externos y combinados. En las 20 piezas dentarias obturadas y analizadas se encontraron poros. La cantidad de poros detectados no presentó diferencias significativas mediante análisis estadísticos cuantitativos ni cualitativos. Los poros se presentaron más frecuentemente en el tercio cervical, independientemente del cemento sellador. Ambos grupos presentan una buena adaptación a nivel apical, siendo esto imprescindible para la longevidad y éxito del tratamiento endodóntico (AU)